Hydraulic torque converter with centrifugal turbine used for drill rig 石油鉆機用離心渦輪液力變矩器
Study on program design and matching calculating for engine and hydraulic torque converter 發動機與液力變矩器匹配計算及程序設計
A three - dimensional design method for the hydraulic torque converter blades were proposed and its basic design flow was provided 摘要探討了液力變矩器葉片三維成型方法,提出了葉片三維成型方法的基本設計流程。
I ) when you deal with such a model , you can predigest the model as the paper . ii ) the capability of the hydraulic torque converter is affected by the pump 經過比較,計算結果和試驗結果的變化方向和趨勢相同,表明采用此方法探討出一套仿真模型是可行的。
We make a 3 - d model of a hydraulic torque converter and calculate the displacement and stress of an automatic transmission equipment . comparing the data of calculation and the test data 通過計算結果與試驗結果的比較,再對液力變矩器模型進行修改,直到計算數值與試驗數值在允許的誤差范圍內。
It is necessary to have a system simulating the hydraulic torque converter from which we can predict the displacement . this paper is to research a model that can simulate the hydraulic torque converter 如能在制造前預知其變形量,并指導設計的不斷改進,將大大縮短整個工藝的時間,節約大量的資金。
Formulas of axial forces in working cells of hydraulic torque converter are presented on the analysis of the distribution of static pressure on working cells of hydraulic torque converter 對石油鉆機液力變矩器各工作輪中液體的靜壓力分布進行了分析,由此得出了液力變矩器各工作輪軸向力的理論計算公式。
Hydraulic torque converter is a kind of device that can transfer the power . it is widely used in automatic transmission of a car . when it is in using , it has axial displacement 液力變矩器是汽車自動調速裝置中廣泛應用的主要部件,它是利用液體作為工作介質來傳遞動力的一種裝置,其內部能量轉換和工作油的流動狀態極其復雜。
By the development of automobile , hydraulic torque converter is major factor in effecting the capability of auto . on the other hand , the axial displacements of hydraulic torque converter also affect the capability of hydraulic torque converter 隨著汽車性能的要求不斷提高,外觀設計更新穎,結構更加緊湊,液力變矩器的變形量對工作性能的影響也是個主要因素。
The simulation results show that ga is effective for intelligent control and can judge the optimal gear shift position during vehicle running , and keep hydraulic torque converter always working in high efficient area 仿真結果表明:該算法收斂速度快,能夠滿足工程車輛對換檔實時性的要求,可以根據車輛運行狀態確定最佳檔位,并能夠保證液力變矩器經常工作在高效區。